Level detection CL-X
This machine adopts the technology of the ray, after filling capping the product through the machine, the X-ray source through a product by to shoot the source to a receiver to read values, when the product level within the most read value, low level had lower reading value is relatively high, borrow the read value to judge whether the level of change is insufficient, if found defective product, namely by eliminating device.
This machine is an online testing system, which can be used to test whether glass bottles, jars, aluminum cans and plastic bottles meet the set standards.
1. The X-ray tube can be closed for maintenance or when not in use.
2. No need to touch the product during testing.
3. Detection speed up to 2000 CPM.
4. Clear menu-type LCD screen.
5. With function display, it is easy to set and adjust with only 4 buttons.
Detailed introduction
Equipment?introduction?:The?machine?is?made?up?of?the?detection?unit,?man-machine?interface,?control?unit,?rejector,?suitable?for?high?speed?PET?bottled?production?line?block?level?detection.Detection?function:?can?be?detected?without?cover,?high?cover,?slanting?cover,?middle-east,?ring?defects,?miscellaneous,?liquid?level?detection,?high?level?and?low?level,?etc.Technical?features:?the?professional?image?processing?unit,?which?can?realize?the?label?360?–?degree?detection.?Concise?in?bottle?design?of?lifting?mechanism,?through?a?simple?manual?regulation?can?quickly?adapt?to?a?variety?of?bottle?type.?Small?test?cabinet,?minimize?equipment?cover?an?area?of?an?area.?Test?running?condition?and?fault?condition?are?graphic?display?in?man-machine?interface.?Configuration?testing?unit?according?to?customer?requirements.
My company produces?vacuum tester?whose basic principle is: if the tank (bottle) vacuum degree is different, in the body cause the tank lid (bottle) is different also, the shape of the deformation of the machine precision components for testing tiny deformation of the lid, the data after the computer automatic processing, immediately analyze whether the products meet the requirements of vacuum, the vacuum did not meet the product immediately launched by the cylinder behind the conveyor line, so the device can carry on the dynamic on-line detection on the conveyor belt, and automatically picking after test did not reach the set of “vacuum” or “inner pressure tank (bottle).
This machine is suitable for two pieces of aluminum cans, three pieces of iron cans, glass bottles and all other cladding containers, with simple and efficient operation.
1.1 application features:
1. It is suitable for vacuum testing of the inner pot of the same sealing machine production line. Different sealing machines can’t be mixed together for testing, because the sealing datum level of different machines is very different.
2. Small error, good repeatability, if it is necessary to change the tank shape, adjustment is very easy.
3. Precision infrared positioning system, 500 containers per minute (high-speed type) and 300 containers per minute (ordinary type) or less, and 5,133 cans or more.
4. All containers, whether iron, aluminum, glass, aluminum and platinum seals or plastic containers, can be inspected as long as the mouth diameter is above 50 mm.
5. As long as 50 ℃ temperature stability of the following are detectable.
6. The length of the conveyor belt is only 50cm.
1.2 main parameters
The range of the tank diameter: Φ 52-105 – mm
Applicable tank height: 39 ~ 133mm
Production capacity: 0 ~ 500 cans/min
Weight: 40 kg
Overall dimension:controller: 400 350 800mm detection component: 380 250 280mm,working principle
Lord if vacuum in tank (bottle), cause the tank lid (bottle) is different also, the shape of the deformation of the machine with the lid of a precision components detection of tiny deformation, the data after the computer automatic processing, immediately analyze whether the products meet the requirements of vacuum, the vacuum did not meet the product immediately launched by the cylinder behind the conveyor line, so the device can carry on the dynamic on-line detection on the conveyor belt, and automatically picking after test did not reach the set of “vacuum” or “inner pressure tank (bottle).
Model: JWN – 2
Scope of application: sampling inspection of inner pressure of cans and PET bottles, and other sampling inspection of pressure after filling with steam.
Product features:
This detector r&d background against defects in conventional detector is developed, the traditional detection method is directly sticked to detect the internal pressure of tank, it will cause great waste, pot is discarded after testing, this detector USES the external pressure directly to obtain the internal pressure, does not destroy tanks, inspection qualified can return line directly, a day can save a lot of losses for the user.
Product parameters:
Rated input voltage: 220vac-50hz +/-10%, including battery and charger.
The whole machine: 15 kg
Can: 0.5 second shows stable pressure.
Accuracy: detection accuracy 2.5kpa
Detection range: 0-1000kpa
Working conditions:
1. Compressed air: the calibration pressure is 0.5mpa.6mm diameter air pipe is required
]]>is a kind of advanced level liquid level detector developed and produced by our company.By using the principle that the intensity of ray changes with the position of the material surface after the interaction between the low-energy photon source and the material under test, the filling liquid material capacity can be controlled.Because of its non-contact measurement method, it fundamentally solves the problem that the conventional weighing method cannot measure the filling liquid material capacity on the production line.Therefore widely used in food, medicine, chemical industry, weapons **** and other filling (whether bottled or canned) liquid material line online automatic control.
Functional description
Application: two – piece can, three – piece can, PET bottle, glass bottle, etc
1. Technical features
Non-contact detection, fast detection speed, high accuracy.
Can automatically adapt to different production line speed, dynamic detection
Stainless steel shell, host seal design and manufacture, anti-fog steam, waterproof drops, strong environmental adaptability.
In idle time, it automatically blocks the emission of high-frequency rays
The use of hardware circuit, the use of embedded operating system, to ensure long-term stable operation
Sound and light alarm at the same time, and automatically remove unqualified containers.
Use 7-inch display touch screen, provide a simple and reliable man-machine interface, change the bottle flexible
Large screen Chinese display, LED backlit LCD, clear and bright writing, man-machine dialogue operation.
Does not contain the isotope radioactive source, USES the soft ray design, the ray protection is safe and reliable.
High cost performance
2. Main technical indicators
Linear speed of conveyor belt in production line: 1.8m/s.50mm tank diameter maximum detection speed up to 1200 cans/min
Container diameter: 20mm ~ 100mm.(different container material density and diameter, different device selection)
Dynamic container resolution: 2mm.(foam and sloshing will affect the detection accuracy)
Static measuring liquid level accuracy: 0.5mm(water)
8-hour static measurement stability: 0.15mm(water)
Reject rate of unqualified containers: 99% (detection speed up to 1200 / min).
Bring the temperature error: within the scope of the 0 ℃ to 40 ℃, relative to the measured value of the 20 ℃ temperature error is 0.25 mm or less
Work requirements: the minimum time width of a can without a can is 10ms, and the conveyor belt must be stable (the smoothness determines the accuracy).
Bring about the use of the environment: the temperature 0 ℃ to 40 ℃, relative humidity is not more than 95%, the power supply: 220 v + 20 v, 50 hz
Power consumption: 150W
Size: length width height: 530mm 150mm 350mm
]]>The products for the domestic blank testing equipment, over the years for domestic aluminum foil sealing tightness test is a notoriously difficult, for the guarantee of product quality are artificial way of low efficiency of low precision of the inspection, waste of human resources is very big, very poor quality control, it is easy to cause poor sealing products into the market, to the adverse impact on the company’s image, network information developed now, there is a quality problem will soon be spread on the Internet, aeriform in an unprepared to company, the product technology through the five key detection technology to finally complete high-precision high-speed on-line detection eliminate waste,For small leakage can be accurately detected.Due to the technical confidentiality of the product, the product does not upload photos and video, customers can call for technical details and function introduction
Detection?function:?Cans?deformation,?the?imperfect,?foreign?bodies,
and?inside?of?the?body/foreign?body?inside?the?cans?bottom?or?surface.
Friendly?interface,?bad?product?processing?method:?pneumatic?single?segment
automatically?weed?out.?Maximum?detection
capability:?72000?BPH.Technical
features:?with?independent?intellectual?property?rights?of?the?underlying?algorithm,
flexible?meet?the?demand?of?all?kinds?of?personalized?detection;
360?degrees?full?range?of?testing?technology?innovation;?Adjustable?light?source,?t
o?adapt?to?more?product?type;?The?design?of?the?bottle?type?quickly?switch;
Rich?production?statistics?and?bad?product?storage,?traces?the?function;
Free?custom?detection?module.
]]>