Beer can filling and sealing unit DPD2404

DPD2404 isobaric filling sealing) is mainly used in the beer production enterprise, is a special cans for automatically filling and sealing equipment, through the delivery of the cans automatically into the tank, automatic filling, automatic sealing, automatic out of the jar conveying process, such as how to improve the labor productivity, ensure the quality of for beer filling provides a reliable guarantee.
This machine is the core of the beer packaging production line equipment, beer bubble appeared in the process of filling, filling and discontent, liquid level is high or low, increase oxygen and bottlenecks air exceeds the standard and the sealing process of the phenomenon such as scratch, deformation, will directly cause damage increased, thereby increasing the beer packaging costs, therefore, cans non-gas filling sealing) filling sealing effect is good or bad will directly affect the enterprise economic benefit.
This machine is used for filling beverage and beer with CO2 gas.
The use of secondary exhaust (exhaust before filling and exhaust after filling) ensures the stability and taste of beer.
Main electric elements adopt Siemens PLC, da converter and omron close to switch, Germany’s Siemens analog output and Korea solenoid valve, designed by the company’s senior electrical engineer into the most reasonable configuration form, the whole production rate can be in accordance with the requirements set by the touch screen, all common fault automatic alarm, and gives the corresponding failure reason, according to the severity of the fault, the PLC automatically determine whether the host can continue to run or stop.
The machine is characterized by fast filling speed, high consistency of liquid level in the tank to the top of the tank after filling, stable operation, good sealing quality, beautiful appearance and easy maintenance.

Beer can filling and sealing unit DPD2404

Filling and sealing machine DPD3006

This machine is especially suitable for the filling and sealing of cans in the beer industry. The secondary exhaust can be carried out in the filling valve to minimize the oxygen increase in the beer filling process.
Filling and can sealing for the overall design, using the principle of isobaric filling, pot through into the pot of the star wheel into the filling machine, reach the tank after booking center, and then filling valve along the bearing CAM down, place the pot on and preloading seal, seal pressure besides centering to cover its own weight, is produced by a cylinder pressure, the pressure inside the cylinder according to the material of POTS can be used on the control panel, to adjust the pressure reducing valve of the pressure of 0 ~ 40 KP (0 ~ 0.04 MPa), at the same time on the open air and the back pressure valve, in the low pressure ring opening at the same time, the back pressure in cylinder filling gas into the tank, and flow into the low pressure ring channel.
This process is used to implement the CO2 flushing procedure to remove the air in the tank. Through this procedure, the oxygen increase is reduced to the minimum during the filling process. No negative pressure is generated in the tank.
After the prefill valve is closed, equal pressure is established between the tank and the cylinder. The liquid valve is opened by the spring under the action of the operating valve stem, and then the filling begins. The material flows down the tank wall through three liquid inlets.
When the liquid level of the material reaches the return pipe, the filling is stopped by blocking the return gas, and an overpressure is generated in the upper part of the tank, thus preventing the material from continuing to flow down.
Material fork will be pulled out of the air valve, liquid valve closed, through the exhaust valve, exhaust so that the pressure in the tank and atmospheric pressure balance, exhaust away from the liquid level, so as to prevent the exhaust out of the liquid.
During the exhaust, the top gas in the tank expands, and the materials in the return pipe fall back into the tank to empty the return pipe.
At the moment of the pot, the centering cover is lifted under the action of the CAM. Under the action of the inner and outer guard plate, the pot leaves the pot platform and enters the canister transport chain of the capping machine and is sent to the capping machine.
This machine is the main electrical components adopt Siemens PLC, omron high-quality configuration, such as the proximity switch by senior electrical engineer design into the most reasonable configuration forms, the whole production rate can be in accordance with the requirements set by the touch screen, all common fault automatic alarm, and gives the corresponding failure reason, according to the severity of the fault, the PLC automatically determine whether the host can continue to run or stop.

Filling and sealing machine DPD30062

Beer can can sealing machine DP150

Can filling machine is suitable for beer and gas?beverage filling, the machine is composed of liquid inlet pipe, lifting cylinder, star wheel into the tank, star wheel out of the tank, transmission device and other components, through the universal joint, the driving force from the can sealing machine to complete the filling process.Can sealing machine is a new type of sealing equipment for beer or beverage produced by our company on the basis of referring to the?sealing machine?of Ferrum company in Switzerland and through digestion and absorption.The machine is composed of upper part, lower part of the machine, lower cover device, automatic cover, output station, bevel gear drive, motor drive and other parts.

Beer can can sealing machine DP1502

Beer can filling machine JW300(30-163)

our company has produced another new type of beer or gas beverage filling machine based on the west German filling machine, which is suitable for filling various types of cans (two cans, three cans).

The number of 30-163 in the model indicates that the number of canning valves is 30 with a pitch of 163mm.
The machine is supported by foot bolts to keep the floor clean.
Simply adjust the foot bolts (adjustable range 50mm) to keep the tank belt at the specified height, range 1250-1400mm.
The driving force of the?filling machine?is transmitted from the can sealing machine to the turbine deceleration book through the universal joint drive shaft, and then directly meshed between the gear on the deceleration book and the external ring gear on the pot support seat, so as to realize the normal operation of the filling machine.
In addition, the turbine reducer also drives the tank belt, for screw feed, input star wheel.
Empty cans are fed into the tank belt, through the tank brake, the synchronous feed screw rod into the star wheel into the filling station, with the filling machine transportation, can achieve the ideal filling, solid cans by a special conveyor belt, synchronously into the can sealing machine.