Can filling and sealing machine DP6B300

This machine is developed on the basis of domestic and foreign (non-gas) can filling and sealing machine (sealing machine).

Product Description

Can filling and sealing machine DP6B300

Can filling and sealing machine DP6B300

Can filling and sealing machine DP6B300

This machine is developed on the basis of domestic and foreign (non-gas) can filling and sealing machine (sealing machine).
According to the normal pressure filling principle, when the empty tank enters into the lifting tray via the idler, the filling valve is aligned with the empty tank. The empty tank is raised and sealed, and the valve mouth of the filling valve is automatically opened. When the filling liquid level is blocked by the valve’s return pipe mouth, the filling is stopped.
The filled pot is sent to the head of the sealing machine through the hook chain, and the lid is sent to the top of the pot through the cap feeder and the pressure head. When the supporting mechanism is raised, the pressure head is pressed on the top of the pot, and the sealing wheel is pre-sealed and then sealed.

The machine main electric components using Siemens PLC, touch screen and analog output and South Korea, solenoid valve, omron high-quality configuration such as proximity switch, senior electrical engineers designed by the company the most reasonable configuration form, the whole production rate can be in accordance with the requirements set by the touch screen, all common fault automatic alarm, and gives the corresponding failure reason, according to the severity of the fault, the PLC automatically determine whether the host can continue to run or stop.

The machine is characterized by fast filling speed, high consistency of liquid level in the tank to the top of the tank after filling, stable operation, good sealing quality, beautiful appearance and easy maintenance.

Main technical parameters:

filling heads: 24
Sealing head: 6 heads
Production capacity: 100-300 cans/min
Applicable tank diameter: 52.5 Φ Φ 83.3 mm

Applicable tank height: 70-133mm
Air source pressure: 0.6mpa
Power: 7.5kw
Overall size: 3500X1950X2200mm

Material:
A. Transmission parts: high quality carbon steel
B. Filling valve assembly: SUS304 stainless steel, silicone rubber, first roller with Taiwan
C. Bucket parts: SUS304 stainless steel
D. Filling parts: pneumatic control, SUS304 stainless steel
E. Conveyor belt components: the side plate is SUS304 stainless steel, and the conveyor chain is POM flat-top chain
F. Worktable components: the frame is carbon steel structure, and the appearance SUS304 stainless steel guard plate
G. Sealing parts: high quality carbon steel, bearing steel and tool steel